For solar street lamps, the most important thing is to regularly clean the accumulated dust around the lampshade. If the accumulated dust is not treated for a long time, the dust will affect the lighting effect of the solar street lamp and make the whole light look particularly blurry. If too much dust accumulates on the solar street light, it will also affect the charging effect of the battery. In the long run, insufficient power supply will cause the light to be dim or not directly lit.
1: Check whether the board is in the rainy season, the control room and the battery are indoor water and water when the wind, rain, snow, or turn, check whether the equipment is working properly after the storm, and the charge and discharge controller is damaged.
2: When the weather is bad, check whether the battery board connection wire and the ground wire are in good contact, and whether they are falling off. Check the battery board bracket for looseness or breakage.
3: The lighting of the solar cell square array should be kept clean at all times. If dust or other dirt is used, gently wipe it with clean gauze water, and do not use hard objects or corrosive solvents to wash, heuristic.
4: If the long and short metal solar lights can be wiped clean with a damp cloth, be careful not to wipe the power cord.
5: Pay attention to the beautiful appearance of the solar street lamp post after installation. From the beginning of the foundation construction, the linear position of the lamp position should be controlled according to the main line, and the line should be changed according to the design of the road.
